5000W PowMr Inverter/Charger 48V Sun Smart

This Inverter/Charger equipped with a 5kw pure sine wave inverter can start/run just about any standard 120v device you can throw at it. It also has a 100amp MPPT Solar Charge controller enable up to 5500W of solar input (Will charge at up to 4800W). A transfer switch is built in so that it can charge and run loads from Generator/Grid. Multiple settings to have it fail to grid, auto start a genset, etc. It can charge from solar and grid/genset at the same time. It can run loads from one or the other.

Suitable for lead acid or lithium, adjustable charge voltage and cutoff voltage to keep the batteries safe. Support BMS communication to have charging and shutoff based on battery percentage instead of a voltage!

Compatible with Solar-Assistant for monitoring via wifi or ethernet. This works off-line if you want just access on the local wifi but also over the internet if desired.

This inverter requires a solar array of 120-500v, if the voltage is too low you’ll see low performance. Try and get the VOC above 300V for best results. Please be careful with high voltage!

Max PV input (VOC) 500V

Max PV input (ISC) 22A

User Manual: https://beenebrothers.com/wp-content/uploads/2023/10/POW-SunSmart-SP5K-user-manual.pdf